Invacare Formula CG Seating, Руководство пользователя

Страница: 82 / 124

7 SETUP/MAINTENANCE
Invacare® Formula™ CG Seating
82
Part No 1143155
7.6 Installing Adjustable Angle Flip-up Footplate Hinge
1. Position footplate hinge on the footrest support tube at the desired height.
2. Position mounting screw, washers, spacer, and locknut on the footrest support as shown.
3. Flip the footplate hinge to the up position.
4. Tighten the mounting screw, washer, and locknut that secure the footplate hinge to the footrest support until the footplate hinge remains in the
up position.
5. Check the up and down motion of the footplate hinge to make sure the user of the wheelchair can operate the footplates easily.
6. Adjust footplate. Refer to Installing Adjustable Angle Flip-up Footplates on page 83.
FIGURE 3 Installing Adjustable Angle Flip-up Footplate Hinge

The footplate hinge will fall to the down position.
 If footplate's motion is too tight, loosen the mounting screw and locknut approximately ¼-turn counterclockwise.
If the footplate's motion is too loose, tighten mounting screw and locknut approximately ¼-turn clockwise.
Footplate
Hinge
Locknut
Spacer
Footrest Support
Washers
Mounting Screw