manualshive.com logo in svg

horiba FluoroMax-3, Руководство по эксплуатации

Поделиться
Скачать
horiba FluoroMax-3 Скачать руководство пользователя страница 26

FluoroMax-3 v. 3.1 (3 Mar 2006) 

Requirements & Installation 

 

1-8 

Note:

 Copying, disassembly, or removal of the softkey is illegal.

 

Note:

 Be sure to agree to the terms of the software license be-

fore using the software.

 

d 

Install any accessories that arrived with the system, using the instruc-
tions that accompany the accessories. 

See Chapter 12 for a detailed list of accessories. 

4 

Install the FluorEssence™ software. 

The spectrofluorometer system is controlled by FluorEssence™ spectroscopy 
software operating within the Windows™ environment. If the computer and 
software were purchased from HORIBA Jobin Yvon Inc., the software installa-
tion is complete. If the computer is not from HORIBA Jobin Yvon Inc., perform 
the installation. Contact a HORIBA Jobin Yvon Inc. Sales Representative for 
recommended specifications for a suitable host computer. 
 
Before the FluorEssence™ software can be installed, however, Windows™ 
must be installed already and operating properly. Refer to the Windows™ man-
ual that came with the computer for installation instructions. 
 
The FluorEssence™ software is supplied on one CD-ROM. Follow the 

FluorEssence™ User’s Guide

 for details on installation. 

Users outside of the USA: 

Users outside of the USA receive a softkey device that connects to the printer port of 
the host computer for software security. The softkey should be left in place on the host 
computer at all times. 

Содержание FluoroMax-3





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды