Hitachi WJ200 Series Software, Инструкция по эксплуатации

Страница: 213 / 420

4
−
10
Intelligent Terminal Listing
Intelligent Inputs
Use the following table to locate pages for intelligent input material in this chapter.
Input Function Summary Table
Symbol Code Function Name Page
FW 00 Forward Run/Stop 4-16
RV 01 Reverse Run/Stop 4-16
CF1 02 Multi-speed Select, Bit 0 (LSB) 4-17
CF2 03 Multi-speed Select, Bit 1 4-17
CF3 04 Multi-speed Select, Bit 2 4-17
CF4 05 Multi-speed Select, Bit 3 (MSB) 4-17
JG 06 Jogging 4-19
DB 07 External DC braking 4-20
SET 08 Set (select) 2nd Motor Data 4-21
2CH 09 2-stage Acceleration and Deceleration 4-22
FRS 11 Free-run Stop 4-23
EXT 12 External Trip 4-24
USP 13 Unattended Start Protection 4-25
CS 14 Commercial power source switchover 4-26
SFT 15 Software Lock 4-27
AT 16 Analog Input Voltage/Current Select 4-28
RS 18 Reset Inverter 4-29
PTC 19 PTC thermistor Thermal Protection 4-30
STA 20 Start (3-wire interface) 4-31
STP 21 Stop (3-wire interface) 4-31
F/R 22 FWD, REV (3-wire interface) 4-31
PID 23 PID Disable 4-32
PIDC 24 PID Reset 4-32
UP 27 Remote Control UP Function 4-34
DWN 28 Remote Control Down Function 4-34
UDC 29 Remote Control Data Clearing 4-34
OPE 31 Operator Control 4-35
SF1~SF7 32~38 Multi-speed Select,Bit operation Bit 1~7 4-36
OLR 39 Overload Restriction Source Changeover 4-37
TL 40 Torque Limit Selection 4-37
TRQ1 41 Torque limit switch 1 4-38
TRQ2 42 Torque limit switch 2 4-38
BOK 44 Brake confirmation 4-38
LAC 46 LAD cancellation 4-39
PCLR 47 Pulse counter clear 4-40
ADD 50 ADD frequency enable 4-41
F-TM 51 Force Terminal Mode 4-42
ATR 52 Permission for torque command input 4-42
KHC 53 Clear watt-hour data 4-43
MI1~MI7 56~62 General purpose input (1)~(7) 4-44
AHD 65 Analog command hold 4-45
CP1~CP3 66~68 Multistage-position switch (1)~(3) 4-46
ORL 69 Limit signal of zero-return
ORG 70 Trigger signal of zero-return
SPD 73 Speed/position changeover 4-48
GS1 77 STO1 input (Safety related signal) 4-49
GS2 78 STO2 input (Safety related signal) 4-49
485 81 Starting communication signal
PRG 82 Executing EzSQ program 4-49
HLD 83 Retain output frequency 4-49
ROK 84 Permission of Run command 4-50
EB 85 Rotation direction detection (phase B) 4-50