Golden Dragon XML6125CLE, Руководство по ремонту

Страница: 435 / 613

Break System BR-6125J93C-01 BR-31
6) Apply lubricating grease to the washer, and then install it together
with bracket onto the housing.
Caution: Make sure the support groove is engaged with the
rack claw.
7) Fasten the screws.
8) Install the grease nozzle.
Grease filling
Use a grease gun to supplement the grease till it overflows from the
support clearance.
Check points
1) Place the load tester at the end of the dedicated tool at a bench clamp
widening at least 215 mm.
2) Place the dedicated tool hexagon spanner at the rear guard ring; and
fasten it on the load tester at the end of the dedicated tool.
3) Fix tightly the housing; check whether the pointer of the dial gauge
at that time has the same status as showed in the figure.
六角扳手
Hexagon spanner
215 毫米（ 8.465 英寸）或以上 215 mm (8.465 inches) or above
4) Confirm that the control arm part of the bracket can be moved
manually.
5) Use your thumb facing the rear guard ring to slightly push the
control arm part of the bracket. Rotate the bench clamp clockwise,
confirm that it is within the specified value scope of the dial gauge
pointer, move the control arm part of the bracket in the direction of
rear bracket. Or confirm that the control arm of the bracket moves
slightly.
8-31