Golden Dragon XML6125CLE, Руководство по ремонту

Страница: 310 / 613

R e p a i r M a n u a l
Corporate Division
Off-Road Driveline Technology
and Axle Systems
5871 214 102 4/4

4.2 Setting of rolling torque of drive pinion bearing
(4 … 10 Nm)
Fit bearing inner ring to the drive pinion until contact is obtained.
Apply assembly force only to the bearing inner ring.
Figure 9

Mount ring (e.g. thickness = 10.35 mm) to the drive pinion.
According to our experience, the correct rolling torque is
obtained when reusing the ring removed during disassembly.
A check, however, is absolutely necessary.
Figure 10

Position drive pinion and mount the heated bearing inner ring
until contact is obtained.
Before mounting the input flange and tightening the slotted
nut (figures 11 and 12), let bearing inner ring cool down to
ambient temperature!
Figure 11
If disassembled, mount screws to the input flange. Support input
flange from below and press the screen sheet onto the input
flange with the smaller diameter coming first until contact is
obtained.
(S) Driver tool
5870 056 008
(S) Handle 5870 260 002
Figure 12
5-52