Golden Dragon XML6125CLE, Руководство по ремонту

Страница: 337 / 613

R e p a i r M a n u a l
Corporate Division
Off-Road Driveline Technology
and Axle Systems
5871 214 102 6/6
Grease O-ring (see arrow) and insert it into the annular groove of
the flange shaft.
Apply compact bearing grease to the flange shaft at the black-
white line on the whole circumference (see assembly of compact
bearing).
Figure 20

Mount flange shaft to the hub carrier and bring it into contact
position at the hub.
Fix flange shaft by hexagon screws.
Tightening torque (M18x1.5/10.9)
M
A
= 440 Nm
If the hub cannot be held in position while tightening the
screws, tighten the screws during the process shown in
figure 25.
Figure 21
6.2 Brake
The brake manufacturer’s instructions and specifications are
mandatory for any operations done on the brake system!
The relating information is included in the repair,
maintenance and service manuals of the component
manufacturer!
The applicable instructions are to be requested from the
brake manufacturer or can be viewed on the brake
manufacturer’s website!
Brake manufacturer and brake type are indicated on the
identification plate of the brake caliper!
Figure 22 shows the position of the identification plate
(arrow) using the KNORR-brake as an example!
Mount brake to the brake disk.
(S) Eyebolt
5870 204 084
(S) Load carrying fixture 5870 281 046
Figure 22
5-79