Golden Dragon XML6125CLE, Руководство по ремонту

Страница: 113 / 613

德纳（北京）电机有限公司 Dana (Beijing) Electric Motor Co. Ltd
. 电话 Tel ： 010 － 69596333
北京市通州区宋庄 Songzhuang Tongzhou District Beijing 101118
德纳（北京）电机有限公司
Dana (Beijing) Electric Motor Co., Ltd.
11. Maintenance items
The first warranty period for all maintenance projects is 5,000 kilometers.
11.1. Motor maintenance items
No.
Maintenance
content
Technical requirements Tool Operation specification
Maintenanc
e interval
1 Appearance
The whole machine is complete,
no signs of collision and damage Visual
inspection
Visually inspect the machine for
completeness, signs of bumps and
damage.
Every
50,000 KM
Dry and dust-free of high and
low voltage wiring harness
Brushes and
vacuum
cleaners
Use a brush or vacuum cleaner to clean
the surface, remove the surface gray
layer, impurities and foreign matter, etc.
Every
50,000 KM
Every
20,000 KM
No foreign matter and
impurities around the air valve
2 Installation
Motor housing and L plate bolt
mounting torque Torque wrench
and sleeve
Cooperate with corresponding tools,
review and adjust and tighten according
to the established torque requirements
Every
20,000 KM
No signs of cracking, unweld,
etc. Visual
inspection
Visually inspect the mounting plate for
signs of breakage or unweld. If there are
above signs, replace the mounting plate.
Every
20,000 KM
No signs of aging, cracking,
crushing and rubber peeling Visual
inspection
Visual inspection and touch to check the
cushion had no signs of aging, cracking,
crushing, and rubber peeling.
Every
20,000 KM
a) The bolts of flanges are
tightly. The torque value meets
the designed requirements
a) Visual
inspection
a) Visual inspection and use tools,
review and tighten according to the
established torque requirements
Every
20,000 KM
Every
20,000 KM
b) There is no axial
displacement of the flange under
static conditions
b) Visual
inspection and
touching
recognition b) Visual inspection and touch
recognition. Hold the flange to apply
reciprocating force to detect whether
there is axial displacement
The bolts of the motor cusion
have no fracture and the torque
meet the design requirements
Torque wrench
and sleeve kit
Use tools, review and adjust and tighten
according to the design requirements of
the vehicle manufacturer
Every
20,000 KM
The angle between the motor
shaft and transmission shaft
meets the design requirements
Visual
inspection and
laser plummet
Cooperate with corresponding tools,
review and adjust and tighten according
to the design requirements of the vehicle
manufacturer
Every
20,000 KM
Note: The motor bearings are
maintenance-free design, no
maintenance is required
2-87