Golden Dragon XML6125CLE, Руководство по ремонту

Страница: 145 / 613

2.2 General safety instructions
Read all safety instructions and information. Failure to comply with safety instructions and information may
lead to property damage, serious injuries or death.
Intended use
The ZF product is exclusively intended for the application as defined in the contract and as agreed on the
time of delivery. Any other or extended form of use does not comply with this definition of intended use.
The intended use includes compliance with this documentation and other applicable documents, in order
to avoid malfunctions and damage in operation.
The ZF product is designed and produced in line with state-of-the-art technology. The ZF product in its
delivery status is safe to operate. However, the ZF product may pose dangers if improperly used by
unauthorized, untrained and uninstructed staff or if not used according to its intended use.
Figures might deviate from the ZF product and are not drawn to scale. No conclusions can be drawn with
regard to size and weight.
Installation, commissioning, maintenance and repair
Perform assembly, commissioning, maintenance and repair work exclusively according to this
documentation and other applicable documents.
Observe the following points:
• Employ authorized, trained and instructed staff.
• Observe technical provisions.
• Only use genuine ZF spare parts.
• Only use genuine ZF accessories.
• Only use genuine ZF special tools.
• Unauthorized changes and modifications lead to the expiry of the operator's license, warranty or
guarantee.
In case of damage, contact ZF and have the following information on the product ready:
• Type
• Parts list [BoM] number
• Serial number
• Operating hours
• Description of damage
Observe safety instructions, valid safety regulations and legal conditions to prevent malfunctions and
damage.
The country-specific safety regulations, accident prevention regulations and environmental protection
provisions apply additionally.
Wear safety-relevant workwear for all work. Depending on the work, also wear personal protective
equipment.
After completing the work, check correct function and functional security.
Safety
8 EN 4474.751.104a - 2018-06 4-8