manualshive.com logo in svg

GE D60, Инструкция по эксплуатации

Операторский бизнес и инструкций по эксплуатации RAMSET D60 доступны для загрузки бесплатно на сайте. Этот ручной инструмент был разработан для обеспечения безопасного и эффективного использования. Скачайте руководство с сайта {ваш сайт} и ознакомьтесь с инструкциями по эксплуатации.

Поделиться
Скачать
background image

GE Multilin

D60 Line Distance Protection System

C-1

APPENDIX C 

C.1 OVERVIEW

C

APPENDIX C IEC 61850 COMMUNICATIONSC.1OVERVIEW

C.1.1 INTRODUCTION

The IEC 61850 standard is the result of electric utilities and vendors of electronic equipment to produce standardized com-
munications systems. IEC 61850 is a series of standards describing client/server and peer-to-peer communications, sub-
station design and configuration, testing, environmental and project standards. The complete set includes:

•

IEC 61850-1: Introduction and overview

•

IEC 61850-2: Glossary

•

IEC 61850-3: General requirements

•

IEC 61850-4: System and project management

•

IEC 61850-5: Communications and requirements for functions and device models

•

IEC 61850-6: Configuration description language for communication in electrical substations related to IEDs

•

IEC 61850-7-1: Basic communication structure for substation and feeder equipment - Principles and models

•

IEC 61850-7-2: Basic communication structure for substation and feeder equipment - Abstract communication service
interface (ACSI)

•

IEC 61850-7-3: Basic communication structure for substation and feeder equipment – Common data classes

•

IEC 61850-7-4: Basic communication structure for substation and feeder equipment – Compatible logical node classes
and data classes

•

IEC 61850-8-1: Specific Communication Service Mapping (SCSM) – Mappings to MMS (ISO 9506-1 and ISO 9506-2)
and to ISO/IEC 8802-3

•

IEC 61850-9-1: Specific Communication Service Mapping (SCSM) – Sampled values over serial unidirectional multi-
drop point to point link

•

IEC 61850-9-2: Specific Communication Service Mapping (SCSM) – Sampled values over ISO/IEC 8802-3

•

IEC 61850-10: Conformance testing

These documents can be obtained from the IEC (

http://www.iec.ch

). It is strongly recommended that all those involved with

any IEC 61850 implementation obtain this document set.

C.1.2 COMMUNICATION PROFILES

IEC 61850 specifies the use of the Manufacturing Message Specification (MMS) at the upper (application) layer for transfer
of real-time data. This protocol has been in existence for several of years and provides a set of services suitable for the
transfer of data within a substation LAN environment. Actual MMS protocol services are mapped to IEC 61850 abstract ser-
vices in IEC 61850-8-1.

The D60 relay supports IEC 61850 server services over TCP/IP. The TCP/IP profile requires the D60 to have an IP address
to establish communications. These addresses are located in the 

SETTINGS 

 PRODUCT SETUP 



 COMMUNICATIONS 



NETWORK

 menu. It is possible to have up to five simultaneous connections (in addition to DNP and Modbus/TCP (non-IEC

61850) connections).

•

Client/server

: This is a connection-oriented type of communication. The connection is initiated by the client, and com-

munication activity is controlled by the client. IEC 61850 clients are often substation computers running HMI programs
or SOE logging software. Servers are usually substation equipment such as protection relays, meters, RTUs, trans-
former tap changers, or bay controllers.

•

Peer-to-peer

: This is a non-connection-oriented, high speed type of communication usually between substation equip-

ment such as protection relays. GSSE and GOOSE are methods of peer-to-peer communication.

•

Substation configuration language (SCL)

: A substation configuration language is a number of files used to describe

the configuration of substation equipment. Each configured device has an 

IEC Capability Description

 (ICD) file. The

substation single line information is stored in a 

System Specification Description

 (SSD) file. The entire substation con-

figuration is stored in a 

Substation Configuration Description

 (SCD) file. The SCD file is the combination of the individ-

ual ICD files and the SSD file.

Содержание D60



























































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D60

D-Link DWC-2000 Cli Reference Manual preview
DWC-2000
Бренд: D-Link Страницы: 113
D-Link DWC-1000 Reference Manual preview
DWC-1000
Бренд: D-Link Страницы: 146
DAVIS 6830 User Manual preview
6830
Бренд: DAVIS Страницы: 8
Vasco RF User And Installation Manual preview
RF
Бренд: Vasco Страницы: 32
Abra AK-10 User Manual preview
AK-10
Бренд: Abra Страницы: 16
SAI Connect Operation Manual preview
Connect
Бренд: SAI Страницы: 16
Hable One Starting Manual preview
One
Бренд: Hable Страницы: 3
Baccara G75-DFC Installation Operation & Maintenance preview
G75-DFC
Бренд: Baccara Страницы: 16
BABYSTYLE OYSTER Instruction Manual preview
OYSTER
Бренд: BABYSTYLE Страницы: 8
BABYSTYLE Hybrid 2 Manual preview
Hybrid 2
Бренд: BABYSTYLE Страницы: 32
Parker DFB Series Operation Manual preview
DFB Series
Бренд: Parker Страницы: 28
Vageo DT-1 Plus Manual preview
DT-1 Plus
Бренд: Vageo Страницы: 2
Vacon 100 INDUSTRIAL Additional Installation Instruction preview
100 INDUSTRIAL
Бренд: Vacon Страницы: 6
Vacon 100 INDUSTRIAL Technical Manual preview
100 INDUSTRIAL
Бренд: Vacon Страницы: 24
Vacon 100X series Marine Installation Manual preview
100X series
Бренд: Vacon Страницы: 30
Vacon 100 flow User Manual preview
100 flow
Бренд: Vacon Страницы: 81
Vacon 100X series Installation And Maintenance Manual preview
100X series
Бренд: Vacon Страницы: 100
YASKAWA PROFINET V1000 Technical Manual preview
PROFINET V1000
Бренд: YASKAWA Страницы: 49

Бренды по названию

Популярные бренды

Загрузить еще бренды