manualshive.com logo in svg

GE D60, Инструкция по эксплуатации

Операторский бизнес и инструкций по эксплуатации RAMSET D60 доступны для загрузки бесплатно на сайте. Этот ручной инструмент был разработан для обеспечения безопасного и эффективного использования. Скачайте руководство с сайта {ваш сайт} и ознакомьтесь с инструкциями по эксплуатации.

Поделиться
Скачать
background image

4-28

D60 Line Distance Protection System

GE Multilin

4.3 FACEPLATE INTERFACE

4 HUMAN INTERFACES

4

4.3.8 CHANGING SETTINGS

a) ENTERING NUMERICAL DATA

Each numerical setting has its own minimum, maximum, and increment value associated with it. These parameters define
what values are acceptable for a setting.

Two methods of editing and storing a numerical setting value are available.

•

0 to 9 and decimal point

: The relay numeric keypad works the same as that of any electronic calculator. A number is

entered one digit at a time. The leftmost digit is entered first and the rightmost digit is entered last. Pressing the MES-
SAGE LEFT key or pressing the ESCAPE key, returns the original value to the display.

•

VALUE keys

: The VALUE UP key increments the displayed value by the step value, up to the maximum value allowed.

While at the maximum value, pressing the VALUE UP key again allows the setting selection to continue upward from
the minimum value. The VALUE DOWN key decrements the displayed value by the step value, down to the minimum
value. While at the minimum value, pressing the VALUE DOWN key again allows the setting selection to continue
downward from the maximum value.

b) ENTERING ENUMERATION DATA

Enumeration settings have data values which are part of a set, whose members are explicitly defined by a name. A set is
comprised of two or more members.

Enumeration type values are changed using the VALUE keys. The VALUE UP key displays the next selection while the
VALUE DOWN key displays the previous selection.

c) ENTERING ALPHANUMERIC TEXT

Text settings have data values which are fixed in length, but user-defined in character. They can be upper case letters,
lower case letters, numerals, and a selection of special characters.

FLASH MESSAGE
TIME: 1.0 

s

For example, select the 

SETTINGS 

 PRODUCT SETUP 



 DISPLAY PROPERTIES 

 FLASH

MESSAGE TIME

 setting.

MINIMUM: 0.5
MAXIMUM: 10.0

Press the HELP key to view the minimum and maximum values. Press the HELP key
again to view the next context sensitive help message.

FLASH MESSAGE
TIME: 2.5 

s

As an example, set the flash message time setting to 2.5 seconds. Press the appropriate
numeric keys in the sequence “2 . 5". The display message changes as the digits are
being entered.

NEW SETTING
HAS BEEN STORED

Until ENTER is pressed, editing changes are not registered by the relay. Therefore, press
ENTER to store the new value in memory. This flash message momentarily appears as
confirmation of the storing process. Numerical values which contain decimal places are
rounded-off if more decimal place digits are entered than specified by the step value. 

ACCESS LEVEL:
Restricted

For example, the selections available for 

ACCESS LEVEL

 are "Restricted", "Command",

"Setting", and "Factory Service".

ACCESS LEVEL:
Setting

If the 

ACCESS LEVEL

 needs to be "Setting", press the VALUE keys until the proper selec-

tion is displayed. Press HELP at any time for the context sensitive help messages.

NEW SETTING
HAS BEEN STORED

Changes are not registered by the relay until the ENTER key is pressed. Pressing
ENTER stores the new value in memory. This flash message momentarily appears as
confirmation of the storing process.

Содержание D60



























































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D60

ABB XFC G5 Quick Start Manual preview
XFC G5
Бренд: ABB Страницы: 2
Bartlett 700 Series Operation Manual preview
700 Series
Бренд: Bartlett Страницы: 30
Lattice Semiconductor CrossLink Programming And Configuration Manual preview
CrossLink
Бренд: Lattice Semiconductor Страницы: 30
WAFER DC200 Manual preview
DC200
Бренд: WAFER Страницы: 15
UE 120 Series Installation And Maintenance Instructions preview
120 Series
Бренд: UE Страницы: 4
XBOX 360 Manual preview
360
Бренд: XBOX Страницы: 7
Lattice Semiconductor HDR-60 User Manual preview
HDR-60
Бренд: Lattice Semiconductor Страницы: 26
Datavideo RMC-230 Instruction Manual preview
RMC-230
Бренд: Datavideo Страницы: 17
Datamax I-Class Installation And Operating Instructions Manual preview
I-Class
Бренд: Datamax Страницы: 22
Gardena 1278 Operator'S Manual preview
1278
Бренд: Gardena Страницы: 14
Gardena 1254 Operator'S Manual preview
1254
Бренд: Gardena Страницы: 8
Van Air SENTINEL Installation, Operation & Maintenance Instructions preview
SENTINEL
Бренд: Van Air Страницы: 4
LAS 16261 Quick Manual preview
16261
Бренд: LAS Страницы: 6
Maclaren Major Elite Manual preview
Major Elite
Бренд: Maclaren Страницы: 43
Lawler 804 Installation & Maintenance Manual preview
804
Бренд: Lawler Страницы: 5
Valco baby ZEE Product Reference Manual preview
ZEE
Бренд: Valco baby Страницы: 8
CELSYS Clip Studio TABMATE Instructions preview
Clip Studio TABMATE
Бренд: CELSYS Страницы: 2
MRMC MIMIC HRNDWHEELS Quick Start Manual preview
MIMIC HRNDWHEELS
Бренд: MRMC Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды