manualshive.com logo in svg

GE D60, Инструкция по эксплуатации

Операторский бизнес и инструкций по эксплуатации RAMSET D60 доступны для загрузки бесплатно на сайте. Этот ручной инструмент был разработан для обеспечения безопасного и эффективного использования. Скачайте руководство с сайта {ваш сайт} и ознакомьтесь с инструкциями по эксплуатации.

Поделиться
Скачать
background image

C-2

D60 Line Distance Protection System

GE Multilin

C.2 SERVER DATA ORGANIZATION

APPENDIX C 

C

C.2SERVER DATA ORGANIZATION

C.2.1 OVERVIEW

IEC 61850 defines an object-oriented approach to data and services. An IEC 61850 

physical device

 can contain one or

more 

logical device(s)

. Each logical device can contain many 

logical nodes

. Each logical node can contain many 

data

objects

. Each data object is composed of 

data attributes

 and 

data attribute components

. Services are available at each

level for performing various functions, such as reading, writing, control commands, and reporting.

Each D60 IED represents one IEC 61850 physical device. The physical device contains one logical device, and the logical
device contains many logical nodes. The logical node LPHD1 contains information about the D60 IED physical device. The
logical node LLN0 contains information about the D60 IED logical device.

C.2.2 GGIO1: DIGITAL STATUS VALUES

The GGIO1 logical node is available in the D60 to provide access to as many 128 digital status points and associated time-
stamps and quality flags. The data content must be configured before the data can be used. GGIO1 provides digital status
points for access by clients.

It is intended that clients use GGIO1 in order to access digital status values from the D60. Configuration settings are pro-
vided to allow the selection of the number of digital status indications available in GGIO1 (8 to 128), and to allow the choice
of the D60 FlexLogic operands that drive the status of the GGIO1 status indications. Clients can utilize the IEC 61850 buff-
ered and unbuffered reporting features available from GGIO1 in order to build sequence of events (SOE) logs and HMI dis-
play screens. Buffered reporting should generally be used for SOE logs since the buffering capability reduces the chances
of missing data state changes. Unbuffered reporting should generally be used for local status display.

C.2.3 GGIO2: DIGITAL CONTROL VALUES

The GGIO2 logical node is available to provide access to the D60 virtual inputs. Virtual inputs are single-point control
(binary) values that can be written by clients. They are generally used as control inputs. GGIO2 provides access to the vir-
tual inputs through the IEC 61850 standard control model (ctlModel) services:

•

Status only.

•

Direct control with normal security.

•

SBO control with normal security.

Configuration settings are available to select the control model for each point. Each virtual input used through GGIO2
should have its 

VIRTUAL INPUT 1(64) FUNCTION

 setting programmed as “Enabled” and its corresponding 

GGIO2 CF SPSCO1(64)

CTLMODEL

 setting programmed to the appropriate control configuration.

C.2.4 GGIO3: DIGITAL STATUS AND ANALOG VALUES FROM GOOSE DATA

The GGIO3 logical node is available to provide access for clients to values received via configurable GOOSE messages.
The values of the digital status indications and analog values in GGIO3 originate in GOOSE messages sent from other
devices.

C.2.5 GGIO4: GENERIC ANALOG MEASURED VALUES

The GGIO4 logical node provides access to as many as 32 analog value points, as well as associated timestamps and
quality flags. The data content must be configured before the data can be used. GGIO4 provides analog values for access
by clients.

It is intended that clients use GGIO4 to access generic analog values from the D60. Configuration settings allow the selec-
tion of the number of analog values available in GGIO4 (4 to 32) and the choice of the FlexAnalog values that determine
the value of the GGIO4 analog inputs. Clients can utilize polling or the IEC 61850 unbuffered reporting feature available
from GGIO4 in order to obtain the analog values provided by GGIO4.

Содержание D60



























































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D60

wattio AIR Read Me preview
AIR
Бренд: wattio Страницы: 20
Babybee MIO Manual preview
MIO
Бренд: Babybee Страницы: 28
Caen V793 Technical Information Manual preview
V793
Бренд: Caen Страницы: 20
HANYOUNG NUX TS500 Manual preview
TS500
Бренд: HANYOUNG NUX Страницы: 56
MacDon FM100 Installation Instructions Manual preview
FM100
Бренд: MacDon Страницы: 32
K&K M7500 Installation Instructions Manual preview
M7500
Бренд: K&K Страницы: 6
LAB-EL LB-762 Installation Manual preview
LB-762
Бренд: LAB-EL Страницы: 25
Cardigo 62323 Instruction Manual preview
62323
Бренд: Cardigo Страницы: 12
ASROCK iEP-5000G Series Quick Installation Manual preview
iEP-5000G Series
Бренд: ASROCK Страницы: 2
Runxin N74Q1 Quick Start Manual preview
N74Q1
Бренд: Runxin Страницы: 4
York S1-TCZCB Quick Reference Manual preview
S1-TCZCB
Бренд: York Страницы: 2
Haiwell S04AI User Manual & Application Case preview
S04AI
Бренд: Haiwell Страницы: 18
Delta Children LX PLUS SIDE X SIDE 11709 Instruction Manual preview
LX PLUS SIDE X SIDE 11709
Бренд: Delta Children Страницы: 12
rauland SWL25 Installation Manual preview
SWL25
Бренд: rauland Страницы: 4
Stephan STAXEL 3,5 Operating Manual preview
STAXEL 3,5
Бренд: Stephan Страницы: 42
NELSEN WATER NRO ROC2 Documentation preview
NRO ROC2
Бренд: NELSEN WATER Страницы: 16
Samson TROVIS 5724-8 Mounting And Operating Instructions preview
TROVIS 5724-8
Бренд: Samson Страницы: 64
Watts AMES Deringer 40 Installation, Operation And Maintenance Manual preview
AMES Deringer 40
Бренд: Watts Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды