Fujikura FSM-100M Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 193

Fujikura FSM-100M Скачать руководство пользователя страница 9

1

Warning and Caution

The FSM-100 Series has been designed for splicing Silica-based optical fibers. Do not
attempt to use this machine for other applications.
Fujikura Ltd. gives careful consideration and regard to personal injury. Misuse of the
machine may result in electric shock, fire and/or serious personal injury.

The following alert symbols are used in
this instruction manual and machine to
indicate warnings and caution for safe
use. Understand the meanings of these
symbols.

WARNING

There is a possibility of death or serious
injury resulting from improper use by
ignoring this indication.

CAUTION

There is a possibility of personal injury
or physical loss resulting from improper
use by ignoring this indication.

         Symbol means “Pay attention”

       Pay attention to hot surface!

         Symbol means “Must not do”

    You must not disassemble!

         Symbol means “Must do”

    You must disconnect a plug!

!

!

Follow all safety instructions

Stop using if unit malfunctions

Instruction Manual

Read and understand all safety
instructions.

Ask our service centers for repair as
soon as possible.

Read this instruction manual carefully
before operating this machine.
Store this instruction manual in a safe
place.

Images / letters in the screen
shown in this manual may differ
from the actual image on the
monitor on the splicer.

«
...
7
8
9
10
11
...
»

Содержание FSM-100M


































































































































































































Отзывы:

Нет отзывов