Fujikura FSM-100M, Инструкция по эксплуатации, Страница: 57 / 193

49
Function Introduction
1.
Fiber Type Compare
1-1. The Fiber identification function
Using the fiber identification function ensures repeatable results for production
splicing supplications. The fiber identification function identifies fiber that is
about to be spliced from core profile data that is stored in splicer memory.
Therefore, it is necessary to install the core profile data of the fiber into splicer
memory beforehand. This fiber identification function can prevent accidental
splicing with the wrong splicer mode and parameters (not optimized for that
particular fiber), and also prevents splicing the wrong fibers.
Installation of the core profile of the fiber
MENU → [Fiber Data Learning] → [Fiber Type Compare]
Put the cleaved fiber on the left side.
With the FSM-100P/P+:
The core profile of the fiber is installed automatically. (The fiber will be rotated
during the process.)
With the FSM-100M/M+:
If the message is displayed on the screen, set the fiber again. Before resetting the
fiber, note that the fiber should be rotated inside the fiber holder.
Select the memory area at the [Select Where to Save] screen, assign a fiber name and
save. Data can be deleted by pushing the MENU key.
Manual Rotation with the FSM-100M/M+
Rotation requires opening the fiber holder lid,
rotating the fiber, closing the lid and recording the
image; rotation angles are random.