Fresenius Kabi Agilia SP, Техническое руководство

Страница: 57 / 306

57
6.2.17 Test 22: LCD Voltage
6.2.18 Test 23: Temperature
Test Description
Run this test to display the charge voltage of the pump’s LCD screen (for information only).
1. Access the Tests menu. See section 6.2.1, page 40.
2. Press the arrow keys to select Test 22: Lcd Voltage .
3. Press enter .
The following data is displayed:

Conversion : This conversion voltage value is the LCD charge pump
voltage measured at the CPU board input terminals.

Voltage : This voltage value is the measured LCD charge pump voltage.
4. Press exit to return to the Tests menu.
Test Description
Run this test to display the temperature measured by the NTC thermistor (for information only).
The CPU board works properly.
If this test fails, replace the CPU board. See section 8.4, page 85.
If the problem persists, contact the Fresenius Kabi Technical Service.
1. Access the Tests menu. See section 6.2.1, page 40.
2. Press the arrow keys to select Test 23: Temperature .
3. Press enter .
The following data is displayed:

Conversion : The temperature conversion value measured in mV by the
NTC thermistor on the CPU board.

Temperature : The temperature measured in °C by the NTC thermistor on
the CPU board.
4. Check that the displayed value is within the limits shown in the table below.
Values Limit
Temperature -20 °C to +80 °C (-4 °F to +176 °F)