Fresenius Kabi Agilia SP, Техническое руководство

Страница: 247 / 306

99
12.4.5 Pressure Alarms
Waiting start !!
Medium (!!) No
The infusion settings have been entered, but
have not been confirmed with
start .

Check the infusion settings, and
press
start to start the infusion.
Upper soft max
Information
signal
No
The upper soft limit is exceeded, according to
the drug settings defined in the drug library.
Lower soft min
Information
signal
No
The lower soft limit is exceeded, according to
the drug settings defined in the drug library.
Reached hard limit
Information
signal
No The upper or lower hard limit is reached.
Message Priority
Stops
Infusion?
Problem / Resolution
Occlusion alarm !!!
High (!!!) Yes
The pressure in the infusion line has reached
the threshold level.

Check whether the infusion line is
occluded. If necessary, readjust the
pressure threshold. See Section 8.3,
page 67.
Occlusion
pre alarm !!
Medium (!!) No
In-line pressure has reached the following
value:

25 mmHg / 2.5 kPa / 0.5 PSI below the
programmed threshold (from 50 to
250 mmHg).

50 mmHg / 5 kPa / 1 PSI below the
programmed threshold (over 250 mmHg).

Check the infusion line.

Set the correct pressure threshold.
Pressure increase !
Low (!) No
The pressure is increasing in the infusion line.

Check for occlusions in the infusion line.
Drop in pressure !
Low (!) No
The pressure is decreasing in the infusion line.

Check the downstream Luer lock
connection and the integrity of the entire
line.
Message Priority
Stops
Infusion?
Problem / Resolution