Fresenius Kabi Agilia SP, Техническое руководство

Страница: 268 / 306

120
16.3.1 Cleaning Instructions
Prerequisites

The pump is powered off.

The power cord and all other cables are unplugged.

The air is at room temperature (20 to 25 °C).

The operator is wearing suitable protective equipment.
Protocol
1.
Place the pump on a clean surface or disposable underlay.
2. Use a ready-to-use wipe to remove any major grime.
3. Thoroughly wipe down all exposed surfaces (housing, keyboard,
syringe barrel area, syringe guard, plunger driver, disengagement
lever, syringe barrel clasp, etc.) of the pump, from top to bottom. You
can use the silver handle to lift and move the pump.

When wiping down the sides, avoid wetting the connector
sockets.

Do not allow liquids to run, leak, or drip into the pump housing.
4. Make sure the pump remains damp for at least 1 minute.
5. Set down the pump, and wipe down the silver handle, the
attachment lock knob, the screw clamp and the release button.
6. Use a fresh ready-to-use wipe to gently wipe down the back side of
the syringe barrel clasp and all exposed surfaces in the syringe
barrel area.
7. Make sure the pump remains damp for at least 1 minute to dissolve
all organic matter.
8. Use a swab to gently scrub the exposed surfaces of the pump. Be
sure to scrub along the seams and edges of the control panel, and
the narrow or hard-to-reach areas.
9. Wipe down the power cord and any pump accessories.
10. Allow the pump to dry completely at room temperature.