Fresenius Kabi Agilia SP, Техническое руководство

Страница: 112 / 306

112
10. Remove the CPU board.
While doing this, take care not to pull out the flat cable on the inside.
11. Disconnect the flat cable [J9].
12. Push the disengagement lever down [9] and move the plunger driver to its maximum.
13. Remove the 2 plastic caps [10] using a flat screwdriver.
14. Unscrew and remove the 2 screws.
15. Unclip and remove the syringe flange cradle [11].
16. Unscrew and remove the 2 screws [12] that hold the base.
17. Remove the base [13].
While removing the base [13], pay attention to the position of angle bracket clip kit [14]
between the base and the aluminum profile. When re-assembling the base, make sure to
position this part as it was originally.
18. Unscrew and remove the 3 screws [15] that hold the right flange assembly to the aluminum
profile.
19. Take the unit apart.
J9
10
11
9
10
13
15
12
12
14
14
13
15 15