Fresenius Kabi Agilia SP Скачать руководство пользователя страница 284

Страница: 284 / 306

136

Warranty

22.1

General Warranty Conditions

22.2

Limited Warranty

22.3

Warranty Conditions for Accessories

Fresenius Kabi

guarantees that this product is free from defects in

material and workmanship during the period defined by the accepted

sales conditions, except for the batteries and the accessories.

To benefit from the materials and workmanship guarantee from our

Fresenius Kabi

sales representative or authorized agent, make sure to

observe the following conditions:



The device must have been used according to the instructions
described in this document and in other accompanying

documents.



The device must not have been damaged while being stored or
repaired, and must not show signs of improper handling.



The device must not have been altered or repaired by unqualified
personnel.



The internal battery of the device must not have been replaced
by a battery other than that specified by the manufacturer.



The serial number (SN) must not have been altered, changed or
erased.

Information



If one or more of these conditions have been violated,

Fresenius Kabi

will prepare a repair estimate covering all

required parts and labor.



To repair or return a device, contact your

Fresenius Kabi

sales

representative.

Batteries and accessories may have specific warranty conditions.

Contact your

Fresenius Kabi

sales representative for more information.

Содержание Agilia SP



















































































































































































































































































































Результаты поиска

Содержание Agilia SP

Отзывы:

Бренды по названию

Популярные бренды

Fresenius Kabi Agilia SP, Техническое руководство

Результаты поиска

Содержание Agilia SP

Отзывы:

Бренды по названию

Популярные бренды