Fresenius Kabi Agilia SP, Техническое руководство

Страница: 55 / 306

55
6.2.15 Test 20: Pump Code
6.2.16 Test 21: Power Info
Test Description
Run this test to display and modify the code which gives access to the Pump Settings from the
Options menu. See section 3.3, page 29.
1. Access the Tests menu. See section 6.2.1, page 40.
2. Press the arrow keys to select Test 20: Pump code .
3. Press enter .
The current Pump Settings access code is displayed.
4. Enter the code
.
5. Press OK to confirm.
6. Press exit to return to the Tests menu.
Information
If you do not want to protect access to the Pump settings by a code, enter "0000".
Test Description
Run this test to display power source information on the following parts:

DC voltage

Battery DC voltage charging value

Backup capacitor voltage and temperature

5 V booster voltage.
Information
The backup capacitor voltage and temperature must be systematically checked during the maintenance
protocol.
The AC power board and power supply boards work properly.
DC voltage out of limits:

Check the connections between power supply board (J5 connector) and AC power
board.

Check the fuse on AC power board.

Replace the power supply board.
See section 8.5, page 88.

Replace the angle bracket supporting the AC power board.
See section 8.5, page 88.
Backup capacitor voltage and/or 5 V booster voltage out of limits:

Connect the pump to an AC power supply and wait for 30 minutes.

Check the backup capacitor voltage.

Replace the power supply board if the voltage is outside the limits.
See section 8.5, page 88.
A too high voltage may result in damage to the equipment.