Foundry FastIron SuperX, Руководство по установке оборудования

Страница: 55 / 198

Installing the Chassis
December 2008 © 2008 Foundry Networks, Inc. 3 - 11
Figure 3.9 Installing an Interface Module in the FSX 1600 Chassis
Attaching a Management Station
You can manage the FastIron X Series system in the following ways:
• You can connect a PC or terminal to the management module’s serial (Console) port or 10/100/1000 Ethernet
port and access the system directly from the PC or terminal, or from a Telnet connection to the PC or
terminal. For more information, see “Attaching a PC or Terminal to the Console Port or 10/100/1000 Copper
Port” on page 3-11.
• You can connect the FastIron X Series switch to your existing management network and manage the switch,
along with other network devices, from a management station. To do this, you can connect a switch to a
Gigabit Ethernet port on the management module. For more information, see “Attaching a Switch to an
Ethernet Port” on page 3-12.
NOTE: The management network into which you can connect a Gigabit Ethernet port must be separate and
isolated from the network over which user packets are switched and routed as shown in Figure 2.10 on page 2-14.
Attaching a PC or Terminal to the Console Port or 10/100/1000 Copper Port
The management module’s Console port, which has a male DB-9 serial connector, and 10/100/1000 Ethernet
copper port(s), which have RJ-45 UTP connectors, allow you to attach a PC or terminal. From the Console port,
you can access the system’s CLI directly from the PC or terminal or via a Telnet connection to the PC or terminal.
From the Ethernet port, you can access the system’s CLI or Web management interface directly from the PC or
terminal or via a Telnet connection to the PC or terminal.
Interf a ce Mod u le