Foundry FastIron SuperX, Руководство по установке оборудования

Страница: 18 / 198

FastIron Hardware Installation Guide for the FSX, FSX 800, and FSX 1600
2 - 8 © 2008 Foundry Networks, Inc. December 2008
Figure 2.5 shows the front of the FSX 1600 chassis. The front of the FSX 1600-ANR chassis is identical to the
front of the FSX 1600 chassis.
Figure 2.5 FSX 1600 Chassis Front
Upon shipment from the factory, the following components are installed in the chassis:
• Two switch fabric modules
• A slot panel in each interface module slot and power supply slot that does not currently have a module or
power supply installed in it. The slot panel ensures proper airflow within the chassis.
• Two AC power supplies
• A fan tray assembly which contains the cooling system for the chassis
• The FSX 1600-ANR chassis has an ANR kit attached to the rear of the chassis
In the chassis slots, you can install the following:
• Up to two management modules
• Up to 16 interface modules
• Up to eight AC or DC power supplies (four system (SYS) power supplies and four POE power supplies)
Before installing any modules or power supplies, you must remove the slot panel.
CAUTION: If you do not install a module in a slot, you must keep the slot panel in place. If you run the chassis
with an uncovered slot, the system will overheat.