Foundry FastIron SuperX, Руководство по установке оборудования

Страница: 21 / 198

Product Overview
December 2008 © 2008 Foundry Networks, Inc. 2 - 11
Figure 2.8 Side-by-Side Comparison of the FSX 1600-ANR and FSX 1600 Chassis
The FSX 1600-ANR chassis was introduced with software release FSX 04.3.00. The ANR chassis supports the
same software release versions supported on the FSX 1600. If your ANR chassis is running software release
04.3.00 or later, the display output for the CLI commands
show chassis and show version identify the chassis as
an ANR chassis. Also, the SNMP object snChasType returns the chassis type ANR-Chassis . For details about
the show chassis command, see “Displaying Chassis Status and Temperature Readings” on page 5-1. For
details about the show version command, refer to the section “Viewing System Information” in the Foundry
FastIron Configuration Guide .
Management Modules
This section describes the management modules for the FastIron X Series chassis devices.
• The FSX chassis requires one management module. The management module occupies one full slot.
• The FSX 800 and FSX 1600 chassis each require one management module and optionally support two
management modules for 100% redundancy. Each management module occupies one half slot.
FSX Management Modules
The FSX management module has a built-in switch fabric module and comes with 12 combination GbE Copper
and Fiber ports.
NOTE: The FSX management module is dedicated, which means that it can be installed in the FSX chassis only.
If you attempt to install the FSX management module in the FSX 800, FSX 1600, or other Foundry chassis, the
chassis and module will not function properly.
F S X 1600-ANR Ch ass i s Re a r View F S X 1600 Ch ass i s Re a r View