Foundry FastIron SuperX, Руководство по установке оборудования

Страница: 28 / 198

FastIron Hardware Installation Guide for the FSX, FSX 800, and FSX 1600
2 - 18 © 2008 Foundry Networks, Inc. December 2008
• The fiber ports have mini-GBIC slots for the types of fiber cabling listed in Table 8.9 on page 8-12.
NOTE: The Management Module does not support copper mini-GBICs.
NOTE: Some older SFP modules (mini-GBICs for Gigabit Ethernet ports) have latching mechanisms which are
larger than the newer parts. These latches could interfere with one another when inserted side by side into a
module. Avoid using these mini-GBICs side by side in the same module. These older modules are identified by the
number PL-XPL-00-S13-22 or PL-XPL-00-L13-23 above the Serial Number. All newer mini-GBICs do not have
this limitation.
The Gigabit Ethernet fiber ports operate at a fixed speed of 1000 Mbps (they do not support 10 Mbps or 100 Mbps
connections), and use auto-negotiation to automatically configure the highest performance mode of inter-
operation with the connected device.
LEDs on the FSX 800 and FSX 1600 Management Modules
The management modules provide status information using the LEDs listed in Table 2.6.
Table 2.6: FSX 800 and FSX 1600 Management Module LEDs
LED Description and Position State Meaning
Pwr Round LED located to the left
of the console port On (Green) The module is receiving power.
Off The module is not receiving power.
Active Round LED located to the left
of the console port On (Green) The module is the active management
module.
Off The module is not the active management
module.
10/100/1000 Copper Port LEDs
Lnk Left-most LED above the port On The port is connected.
Off No port connection exists.
Act Right-most LED above the
port. On or Blinking The port is transmitting and receiving
traffic.
Off The port is not transmitting or receiving
traffic.
1000 Mbps Fiber Port LEDs
Lnk/Act Round LED located beneath
the fiber connectors On (Green) A link is established with the remote port.
Blinking The port is transmitting and receiving
packets.
Off A link is not established with the remote
port.
10-GbE Port LEDs
Lnk Top-most LED to the left of the
port. On Fiber port is connected.
Off No fiber port connection exists.