Foundry FastIron SuperX, Руководство по установке оборудования

Страница: 29 / 198

Product Overview
December 2008 © 2008 Foundry Networks, Inc. 2 - 19
Console Port
The Console port on the management module is a standard DB-9 serial connector through which you can attach a
PC or terminal to configure the system using the command line interface (CLI).
The Console port interfaces the control plane only and not the data plane.
Reset Button
The reset button on the management module allows you to restart the system. The reset button is recessed to
prevent it from being pushed accidentally.
The reset button is located next to the console port on the management module.
Switch Fabric Modules (FSX 800 and FSX 1600 only)
The switch fabric modules switch user packets from one interface module installed in the chassis to another.
Unlike the FSX, which has a switch fabric module built into the management module, the switch fabric modules in
the FSX 800 and FSX 1600 chassis are separate from the management modules and are physically located next
to the management modules.
Figure 2.14 shows the FSX 800 and FSX 1600 switch fabric module.
Figure 2.14 FSX 800 and FSX 1600 Switch Fabric Module
LEDs on the Switch Fabric Module
The front panel provides status information using the LEDs listed in Table 2.7.
Interface Modules
This section describes the Interface modules for the FastIron X Series chassis devices.
• In the FSX chassis, you can install up to eight Interface modules in the slots shown in Figure 2.2 on page 2-5.
Act Bottom-most LED to the left of
the port. On or Blinking The port is transmitting and receiving
traffic.
Off The port is not transmitting or receiving
traffic.
Table 2.7: Switch Fabric Module LEDs
LED Description and Position State Meaning
Pwr Top-most LED On (Green) The module is receiving power.
Off The module is not receiving power.
Active Bottom-most LED On (Green) The module is functioning properly.
Off The module is not functioning properly.
Table 2.6: FSX 800 and FSX 1600 Management Module LEDs (Continued)
LED Description and Position State Meaning
Pwr
Active