Foundry FastIron SuperX, Руководство по установке оборудования

Страница: 61 / 198

Installing the Chassis
December 2008 © 2008 Foundry Networks, Inc. 3 - 17
Active On The module is
functioning as the
active management
module. Off Neither of the management
module(s) is managing the switch
fabric and interface modules.
A problem could have occurred
during initialization. Check your
attached PC or terminal for
possible error messages.
Pwr On The module is
receiving power. Off The module is not receiving power.
You can do the following:
• Make certain that the module
is installed properly. For more
information, see “Installing the
Management and Interface
Modules” on page 3-7.
• If using AC power supplies,
see the entry for the AC
power supply LED in this table
for more information.
10/100/
1000
Ethernet
Port On – Green A link is established
with the remote port. Off A link is not established with the
remote port. You can do the
following:
• Verify that the connection to
the other device has been
properly made. Also, make
certain that the other device is
powered on and operating
correctly.
• Try using a different cable.
10/100/
1000
Ethernet
Port On or blinking –
Yellow The port is transmitting
and receiving packets. Off for an
extended
period The port is not transmitting or
receiving packets.
You can check the other 10/100/
1000 Ethernet port LED to make
sure a link is established with the
remote port. If not, take the actions
described in the Meaning/Action
column for the other 10/100/1000
Ethernet port LED.
Interface Module
Link/Activity On or blinking A link is established
with the remote port
and the port is
transmitting and
receiving user packets. Off At this stage of the installation, you
have not yet cabled the Gigabit
Ethernet ports, so this LED will be
off.
After cabling this port, if this LED is
off, a link is not established with
the remote port.
Table 3.3: Desired and Abnormal LED States After System Power On (Continued)
LED Desired State Meaning Abnormal
State Meaning/Action