Foundry FastIron SuperX, Руководство по установке оборудования

Страница: 34 / 198

FastIron Hardware Installation Guide for the FSX, FSX 800, and FSX 1600
2 - 24 © 2008 Foundry Networks, Inc. December 2008
Figure 2.18 shows the IPv4 100/1000 Hybrid Fiber interface module’s front panel.
Figure 2.18 IPv4 100/1000 Hybrid Fiber Interface Module Front Panel
Figure 2.18 shows the IPv6 100/1000 Hybrid Fiber interface module’s front panel.
Figure 2.19 IPv6 100/1000 Hybrid Fiber Interface Module Front Panel
The front panel includes the following control features:
• 24 Gigabit Ethernet fiber ports
• 24 LEDs
The ports on the 24-port 100/1000 Gigabit Ethernet Hybrid Fiber module operate at a fixed speed of 100 or 1000
Mbps (they do not support 10 Mbps connections), and use auto-negotiation to automatically configure the highest
performance mode of inter-operation with the connected device.
The mini-GBIC slots support the 100Base and 1000Base fiber cabling listed in “Network Interfaces” on page 2-25.
Support for 100Base-FX on the 100/1000 Interface Module
The 24-port 100/1000 fiber interface module supports the following types of SFPs for 100Base-FX:
• Multimode SFP – maximum distance is 2 kilometers
• Bidirectional single mode SFP – maximum distance is 10 kilometers
• Long Reach (LR) – maximum distance is 40 kilometers (introduced in software release FSX 03.1.00)
• Intermediate Reach (IR) – maximum distance is 15 kilometers (introduced in software release FSX 03.1.00)
To enable support for 100BaseFX, you must enter the CLI command 100-fx at the Interface level of the CLI. For
CLI command details, see the section “Enabling and Disabling Support for 100BaseFX” in the
Foundry FastIron
Configuration Guide .
2-Port 10-Gigabit Ethernet Interface Modules
The 2-port 10-Gigabit Ethernet modules contain two physical ports, through which you can connect the Foundry
device to other network devices at a speed of 10 Gigabits per second.
The modules have two optical interfaces with LC connectors for 10-Gigabit Small Form Factor Pluggable (XFP)
MSA-compliant transceivers. The transceivers support 10GBase-SR, 10GBase-LR, and 10GBase-ER fiber optic
cabling for LAN PHY or WAN PHY (LAN/WAN module only).
Port 1
Port 2
Port 1 3
Port 24
LED s
S X
424HF
Port 1
Port 2
Port 1 3
Port 24
LED s
S X
624HF