Foundry FastIron SuperX, Руководство по установке оборудования

Страница: 27 / 198

Product Overview
December 2008 © 2008 Foundry Networks, Inc. 2 - 17
Figure 2.12 shows the front panel of the IPv4 and IPv6 management modules with two 10-GbE ports.
Figure 2.12 FSX 800 and FSX 1600 Management Module with two 10-GbE ports
Figure 2.13 shows the front panel of the IPv4 and IPv6 management modules with eight GbE ports.
Figure 2.13 FSX 800 and FSX 1600 IPv4 and IPv6 8-port Management Module
The front panel on the management modules include the following control features:
• A Console port and 10/100/1000 RJ-45 copper port allow you to access the system’s CLI directly from a PC
or terminal or via a Telnet connection to the PC or terminal.
• Depending on the type of management modules installed in the device, the management modules have the
following ports:
• no 10-GbE fiber ports
• two 10-GbE fiber ports
• eight GbE copper and fiber ports (four copper and four fiber)
• LEDs for power and active/standby status
• Four LEDs for the two 10-GbE fiber ports (2-port 10-GbE modules only)
• A recessed reset button
10/100/1000 GbE Copper Port on the FSX 800 and FSX 1600 Management Modules
The 10/100/1000 RJ-45 copper port on the management module enables you to attach a PC or terminal. From
this Ethernet port, you can access the system’s CLI or Web management interface directly from the PC or terminal
or via a Telnet connection to the PC or terminal.
10-GbE Ports on the FSX 800 and FSX 1600 2-port 10-GbE Management Modules
The FSX 800 and FSX 1600 2-port 10-GbE management modules come with two 10-GbE fiber ports through
which you can connect your device to other network devices at a speed of 10 Gigabits per second.
The 10-GbE ports have optical interfaces with LC connectors for 10-Gigabit Small Form Factor Pluggable (XFP)
MSA-compliant transceivers. The transceivers support the fiber optic cabling for LAN PHY listed in Table 8.9 on
page 8-12.
Gigabit Ethernet Ports on the FSX 800 and FSX 1600 8-port Management Modules
The FSX 800 and FSX 1600 8-port management modules come with eight copper and fiber Gigabit Ethernet ports
(four copper and four fiber), through which you can connect your device to other network devices at a speed of 1
Gigabit per second. These ports are not combo ports and can be used simultaneously.
• The copper ports have RJ-45 copper interfaces for 1000Base-T, Cat5 copper cabling – The copper ports
support automatic MDI/MDIX detection, and use auto-sensing and auto-negotiating to determine the speed
(10, 100, or 1000 Mbps) and duplex mode (full-duplex or half-duplex) of the port at the other end of the link,
and adjust the port accordingly. Note that ports operating at 1000 Mbps operate in the full-duplex mode only
and cannot be modified.
Pwr
Console
1 2
Ethernet
10/100/1000
Active
Link
Act
Link
Act
Console
Pwr
Active
Ethernet
10/100/1000
1 2 3 4
5 6 7 8