Foundry FastIron SuperX, Руководство по установке оборудования

Страница: 53 / 198

Installing the Chassis
December 2008 © 2008 Foundry Networks, Inc. 3 - 9
4. Insert the management module or the interface module into the appropriate chassis slot and slide the card
along the card guide until the ejectors on either side of the module move close to the module front panel.
5. Push the ejectors toward the center of the module to fully seat the module in the backplane.
6. Use the #2 Phillips-head or flathead screwdriver to tighten the two screws at either end of the module front
panel.
The following illustrations show placement of the management and interface modules in the FastIron X Series
chassis devices.
Figure 3.5 Installing a Management Module in the FSX Chassis
Figure 3.6 Installing a Management Module in the FSX 800 Chassis
M a n a gement Mod u le