Installing the Chassis
December 2008
© 2008 Foundry Networks, Inc.
3 - 19
Displaying the Module Status
After you have attached a PC or terminal to the management module’s Console port or Ethernet port and the
Foundry device has initialized successfully, press
Enter
to display the following CLI prompt in the terminal
emulation window:
FastIron>
If you do not see this prompt:
1.
Make sure the cable is securely connected to your PC or terminal and the Console port or Ethernet port.
2.
Check the settings in your terminal emulation program. In addition to the session settings listed in “Attaching
a PC or Terminal to the Console Port or 10/100/1000 Copper Port” on page 3-11, make sure the terminal
emulation session is running on the same serial port you attached to the Console port.
If you see the prompt
FastIron>
or similar, you are connected to the system and can display the status of the
modules using the CLI. Enter the
show module
command at any CLI level.
The following shows the output of the
show module
command when entered on the FSX:
The following shows the output of the
show module
command when entered on the FSX 800. The display output
is similar on the FSX 1600.
Syntax:
show module
The Status column shows the module status. The status can be one of the following:
•
OK – The module is up and running
FastIron# show module
Module Status Ports Starting MAC
S1: SX-424C 24-port Gig Copper Module OK 24 00e0.5200.0100
S2: SX-424C 24-port Gig Copper Module OK 24 00e0.5200.0120
S3:
S4: SX-424C 24-port Gig Copper Module OK 24 00e0.5200.0160
S5: SX-424C 24-port Gig Copper Module OK 24 00e0.5200.0180
S6: SX-424C 24-port Gig Copper Module OK 24 00e0.5200.01a0
S7:
S8:
S9: SX-12GM-4 12-port Management Module OK 12 02e0.5200.0120
FastIron SX 800 Switch# show module
Module Status Ports Starting MAC
F1: SX-FISF Switch Fabric active
F2: SX-FISF Switch Fabric active
S1: SX-F424C 24-port Gig Copper OK 24 00e0.beef.0000
S2: SX-F424C 24-port Gig Copper OK 24 00e0.beef.0000
S3: SX-F42XGW 2-port 10G LAN/WAN OK 2 00e0.beef.0030
S4: SX-F424C 24-port Gig Copper OK 24 00e0.beef.0048
S5: SX-F42XGW 2-port 10G LAN/WAN OK 2 00e0.beef.0060
S6: SX-F424C 24-port Gig Copper OK 24 00e0.beef.0078
S7: SX-F424C 24-port Gig Copper OK 24 00e0.beef.0090
S8: SX-F424F 24-port Gig Fiber OK 24 00e0.beef.00a8
S9: SX-FIZMR4 0-port Management Active 0
{ Status : OK }
S10: SX-FIZMR4 0-port Management Standby 0
{ Status : Absent }
Содержание FastIron SuperX
Страница 139: ...Maintaining the Hardware December 2008 2008 Foundry Networks Inc 7 25 AC1 AC2 AC3 AC4 Cord Retainer Cord Retainer...
Страница 148: ...FastIron Hardware Installation Guide for the FSX FSX 800 and FSX 1600 7 34 2008 Foundry Networks Inc December 2008...
Страница 168: ...FastIron Hardware Installation Guide for the FSX FSX 800 and FSX 1600 8 20 2008 Foundry Networks Inc December 2008...
Страница 198: ...FastIron Hardware Installation Guide for the FSX FSX 800 and FSX 1600 C 16 2008 Foundry Networks Inc December 2008...