Foundry FastIron SuperX, Руководство по установке оборудования

Страница: 26 / 198

FastIron Hardware Installation Guide for the FSX, FSX 800, and FSX 1600
2 - 16 © 2008 Foundry Networks, Inc. December 2008
NOTE:
• 512 MB SDRAM enables support for large routing tables (1,000,000 BGP routes) with the full Layer 3
code.
• The SX-FI8GMR4 and SX-FI8GMR4-PREM management modules were added in release FSX 04.3.00.
• The IPv6 management modules ending with -PREM were introduced in software release 04.0.00. These
modules provide additional support for full Layer 3 IPv4 routing protocols.
• The IPv6 management modules ending with -PREM6 were introduced in software release 04.1.00.
These modules provide additional support for full Layer 3 IPv4 and IPv6 routing protocols. The -PREM6
management modules require software release 04.1.00 or higher to run the supported IPv6 routing
protocols and features.
The FSX 800 and FSX 1600 management modules perform the following tasks:
• Control the hardware components
• Control the separate switch fabric modules
• Run the networking protocols
• Provide the real time operating system
FSX 800 management modules are located in slots 9 and 10, just above the switch module slots (see Figure 2.4).
FSX 1600 management modules are located in slots 9 and 10 along the center of the chassis (see Figure 2.6).
Figure 2.11 shows the front panel of the IPv4 and IPv6 management modules with no ports.
Figure 2.11 FSX 800 and FSX 1600 Management Module with No Ports
SX-FI2XGMR6 two 10-GbE ports 667 512
SX-FI2XGMR6-PREM
SX-FI2XGMR6-PREM6
SX-FI8GMR6 eight GbE ports (four
copper and four fiber) 667 512
SX-FI8GMR6-PREM
SX-FI8GMR6-PREM6
Table 2.5: FSX 800 and FSX 1600 Management Modules
Part Number Description Microprocessor
Speed (MHz) MB SDRAM
Pwr
Console
Ethernet
10/100/1000
Active