Fagor CNC 8070 Скачать руководство пользователя страница 138

Страница: 138 / 276

Hardware configuration.

CNC 8070

CENTRAL U

FOR C

ABI

NET (Q7-A

PLATFORM).

ific

·138·

: 1911)

7.1

Specifications.

Type.

Description.

General.

• In-cabinet Central Unit
• Dimensions (width x height x depth)

- 36.5 × 313.1 × 235.5 mm.
- 1.43" × 12.32" × 9.27".

System.

• Processor:

- 8070 BL

- CP-IC-E352-2-2.

- 8070 OL (select)

- CP-IC-E352-2-2.
- CP-IC-E354-4-4.

- 8070 L

- CP-IC-E354-4-4.

• RAM:

- 2 GB.

• Non-volatile RAM (FRAM).
• Storage (select):

(SO, CNC and user programs.
- Internal 8 GB NandFlash.

• Storage expansion (optional):

(additional storage space for user programs).
- CFast 32 GB.
- CFast 128 GB.

• Without fan.
• Without battery.
• SO (select):

- Windows 7 (32 bits).
- Windows 7A (32 bits multi-touch).

Regulation.

• CE.

Packaging.

• The package meets the regulation EN 60068-2-32 procedure 1 with a

random fall from a height not greater than 1 m.

Ambient.

• Storage and transport temperature:

- Between -40 ºC (-40 ºF) and +70 ºC (158 ºF).

• CNC working temperature:

- Between 5 ºC (41 ºF) and 55 ºC (131 ºF).

• Working temperature outside the cabinet:

- Between 5 ºC (41 ºF) and 40 ºC (104 ºF).

• Working temperature inside the cabinet:

- Between 5 ºC (41 ºF) and 55 ºC (131 ºF).

• Relative humidity:

- 20 ~ 85% RH without condensation.

• Pollution degree 2.
• Maximum work altitude:

- The unit must work properly at 2000 m according to IEC 61131-2.

• Vibration test according to IEC 60068-2-6 with a frequency step of 1

octave/minute (±10%) and a duration of 10 sweeps.
- 5 Hz



8.4 Hz; movement of constant 3.5 mm amplitude (peak value).

- 8.4 Hz



150 Hz; 1g acceleration and constant amplitude (peak value).

• Degree of protection: IP20.

Power supply.

• Use a regulated 24 V DC power supply (between -15% and +20%) and 2 A

(including voltage ripple and noise). The power supply must meet the
UL1950 standard.

Connectivity.

• 4 USB 2.0 ports
• 1 USB 3.0 port.
• 1 Ethernet port for 10/100/1000 BaseT connection.
• 1 DVI-D video output (maximun resolution of 1920×1200).
• CAN Bus (CANfagor/CANopen).
• Sercos II bus.
• EtherCAT bus.

Содержание CNC 8070





















































































































































































































































































Результаты поиска

Содержание CNC 8070

Отзывы:

Похожие инструкции для CNC 8070

Бренды по названию

Популярные бренды

Fagor CNC 8070, Конфигурация оборудования

Результаты поиска

Содержание CNC 8070

Отзывы:

Похожие инструкции для CNC 8070

Бренды по названию

Популярные бренды