Fagor CNC 8070, Конфигурация оборудования

Страница: 66 / 276

Hardware configuration.
CNC 8070
5.
CENTRAL
UNIT + MONITO
R (ETX PLATFORM).
Ha
rd
ware function
ality.
Co
nne
ctors.
·66·
(R
EF
: 1911)
Ethernet.
8-pin RJ45 connector and 2 status LED's.
USB ports.
Type A USB double connector.
Mouse with PS-2 connector.
6-pin minidin female connector.
·VGA· connector.
15-pin female SUB-D HD type connector.
1 3 2 4 5 7 6 8
Pin. Signal.
1 TX+ (transmit data).
2 TX- (transmit data).
3 RX+ (receive data).
4 - - -
5 - - -
6 RX- (receive data).
7 - - -
8 - - -
LED. Meaning.
Green The LED turns on when the central unit is connected to
network.
Yellow The LED blinks when data is being transferred.
Pin. Signal.
1 + 5 V
2 DT -
3 DT +
4 GND
4
2
3
1
4
2
3
1
No USB devices must be used nor connected while executing a part program. Using USB devices may
slow down the execution or cause some "RT-IT overflow" type error.
USB devices must comply with the generic regulation IEC 61000-6-2:2005 on immunity for industrial
use. We recommend to also comply with the European Directive 2004/108/EC on EMC for industrial
use.
i
Pin. Signal.
1 Mouse data.
2 - - -
3 GND
4 +5 V
5 Mouse clock.
6 - - -
1
3
5
2
4
6
Pin. Signal.
1 MAINS
2 GREEN
3 BLUE
4 - - -
5 GND
6 GND_RED
7 GND_GREEN
8 GND_BLUE
Pin. Signal.
9 - - -
10 GND_SYNC
11 - - -
12 - - -
13 HSYNC
14 VSYNC
15 - - -
5
1
10
6
15
11