Endress+Hauser SpectraSensors J22 TDLAS, Руководство по эксплуатации

Страница: 73 / 150

J22 TDLAS Gas Analyzer Operating Instructions
Hauser 73
7.15.1 Stream submenu
In the stream submenu, you can set parameters related to the stream that needs to be measured.
Navigation Setup menu → Advanced setup → Stream
▸ Stream
Analyte type
→ 
Select calibration → 
Rolling average number → 
Parameter overview with brief description
Parameter Description User entry Factory setting
Analyte type The analyte measured by the
analyzer.
— H
2
O
Select calibration Changes and sets the calibration •
1
• 2
• 3
• 4
1
Rolling average
number
Sets the number of
measurements included in the
running average.
Positive integer 4
7.15.2 Sensor adjustment submenu
The sensor adjustment submenu contains parameters that pertain to the functionality of the sensor.
Navigation Setup menu → Advanced setup → Sensor adjustment
▸ Sensor adjustment
Concentration adjust → 
Concentration multiplier (RATA) → 
Concentration offset (RATA) → 
2fbase curve source → 
2fbase curve RT update → 
▸ Calibration 1 to n
→ 
Parameter overview with brief description
Parameter Prerequisite Description User entry Factory setting
Concentration adjust — Enables or disables
adjustment factors.
• On
• Off
Off
Concentration
multiplier (RATA)
Used if Concentration
Adjust is enabled.
Slope adjustment
factor.
Signed floating point
number
1.0
Concentration offset
(RATA)
Used if Concentration
Adjust is enabled.
Offset adjustment
factor.
Signed floating point
number
0
2fbase curve source Used if Base Curve
subtraction is enabled.
Selects which reference
to subtract.
• Ref0Curve
• Ref0RTCurve
Ref0Curve
2fbase curve RT
update
Used if Base Curve
subtraction is enabled.
Option to update the
stored RT base curve
• Cancel
• Start
Cancel