Endress+Hauser SpectraSensors J22 TDLAS, Руководство по эксплуатации

Страница: 75 / 150

J22 TDLAS Gas Analyzer Operating Instructions
Hauser 75
▸ Calibration 1 to n
Hydrogen sulfide H2S → 
Hydrogen H2 → 
Parameter overview with brief description
The term “mol” in the table below is an abbreviation for mole fraction.
Parameter Description User entry
Factory
setting
Stream change
compensation
Enables or disables the Stream Change Compensation feature.
• On
• Off
Off
Methane CH4 Sets the mole fraction of Methane in the dry gas mixture. 0.4 to 1.0 mol 0.75 mol
Ethane C2H6 Sets the mole fraction of Ethane in the dry gas mixture. 0.0 to 0.2 mol 0.1 mol
Propane C3H8 Sets the mole fraction of Propane in the dry gas mixture. 0.0 to 0.15 mol 0.05 mol
IButane C4H10 Sets the mole fraction of Ibutane in the dry gas mixture. 0.0 to 0.1 mol 0 mol
N-Butane C4H10 Sets the mole fraction of N-Butane in the dry gas mixture. 0.0 to 0.1 mol 0 mol
Isopentane C5H12 Sets the mole fraction of Isopentane in the dry gas mixture. 0.0 to 0.1 mol 0 mol
N-Pentane C5H12 Sets the mole fraction of N-Pentane in the dry gas mixture 0.0 to 0.1 mol 0 mol
Neopentane C5H12 Sets the mole fraction of Neopentane in the dry gas mixture 0.0 to 0.1 mol 0 mol
C6H14+ Sets the mole fraction of in the dry gas mixture 0.0 to 0.1 mol 0 mol
Nitrogen N2 Sets the mole fraction of Nitrogen in the dry gas mixture. 0.0 to 0.55 mol 0 mol
Carbon dioxide CO2 Sets the mole fraction of Carbon dioxide in the dry gas mixture. 0.0 to 0.3 mol 0.1 mol
Hydrogen sulfide H2S Sets the mole fraction of Hydrogen sulfide in the dry gas
mixture.
0.0 to 0.05 mol 0 mol
Hydrogen H2 Sets the mole fraction of Hydrogen in the dry gas mixture. 0.0 to 0.2 mol 0 mol
7.15.4 Additional display configurations submenu
In the Display submenu you can set all the parameters associated with the configuration of the local display.
Navigation Setup menu → Advanced setup → Display
▸ Display
Format display → 
Value 1 display
→ 
0% bargraph value 1 → 
100% bargraph value 1 → 
Decimal places 1 → 
Value 2 display → 
Decimal places 2 → 
Value 3 display → 
0% bargraph value 3 → 
100% bargraph value 3 → 