Endress+Hauser SpectraSensors J22 TDLAS, Руководство по эксплуатации

Страница: 40 / 150

Operating Instructions J22 TDLAS Gas Analyzer
40 Hauser
Functional role/Menu User Role and Tasks Content/Meaning
Task
Oriented
Display
Language Role Operator, Maintenance
Tasks during operation:
• Configuring the
operational display
• Reading measured values
• Defining the operating language
• Defining the web server operating language
Operation
• Configuring the operational display (e.g.,
display format)
Setup Maintenance role
Commissioning:
• Configuration of the
measurement
• Configuration of the
inputs and outputs
• Configuration of the
communication interface
Wizards for fast commissioning:
• Set the system units
• Configuration of the communication interface
• Display I/O configuration
• Configure the inputs and outputs
• Configuring the operational display
• Define the output conditioning
Advanced setup
• For more customized configuration of the
measurement (adaptation to special
measuring conditions)
• Administration (define access code, reset
measuring device)
Diagnostics Maintenance role
Fault elimination:
• Diagnostics and
elimination of process
and device errors
• Measured value
simulation
Contains all parameters for error detections and
analyzing process errors:
• Diagnostic list. Contains up to 5 currently
pending diagnostics messages.
• Event logbook. Contains event messages that
have occurred.
• Device information. Contains information for
identifying the device.
• Measured values. Contains all current
measured values.
• Data logging submenu. Storage and
visualization of measured values
• Heartbeat technology. The functionality of
the device is checked on demand and the
verification results are documented.
• Simulation. Is used to simulate measured
values or output values.
Function
Oriented
Expert Tasks that require detailed
knowledge of the function of the
device:
• Commissioning
measurements under
difficult conditions
• Optimal adaptation of
the measurement to
difficult conditions
• Error diagnostics in
difficult cases
• Detailed configuration of
the communication
interface
Contains all the parameters of the device. The structure
of this menu is based on the function blocks of the
device:
• System. Contains all higher-order device
parameters that do not concern the
measurement or the communication interface.
• Sensor. Configuration of the measurement.
• Output. Configuration of the analog current
outputs and switch outputs.
• Input. Configuration of the analog current
inputs.
• Communication. Configuration of the digital
communication interface and the web server.
• Diagnostics. Error detection and analysis of
process and device errors, and for device
simulation and Heartbeat Technology.