Endress+Hauser SpectraSensors J22 TDLAS, Руководство по эксплуатации

Страница: 134 / 150

Operating Instructions J22 TDLAS Gas Analyzer
134 Hauser
11.6.19 CSA Krohne armored flow meter kit, SS P/N 1100002282
A Both the blue and white wires will have 2 in. of heat-shrink (item 7) installed over the ends.
B Hardware for bracket to panel.
BR Brown wire to pin 2 on rectangular connector.
R Red wire to pin 2 on rectangular connector.
Materials
1.
Flow meter, armored, CSA
2.
Flat washer (2)
3.
Lock washer (2)
4.
Socket head screw, M4-0.7 x 10 (2)
5.
Contact connector
6.
Cable gland
7.
Heat-shrink, olefin
8.
Rectangular connector, 4 position

Torque screws (item 4) to 2.6 Nm (23 lb-in).

Flowrate range: 0.2-2.000 slpm

CRN compliant component.
11.6.20 Flow meter gas fittings without bypass, SS P/N 1100002283
Materials
1.
Male elbow
2.
Connector fitting
3.
Tape, third seal TFE

Select this connector kit if the sample conditioning system has one flow meter (without bypass).

Apply 2 to 3 wraps of tape (item 3) to both connectors during installation.

NACE and MTR reports available upon request.

CRN compliant component.
J6 Rectangular connector is inserted to the second connector
on the optical head PCB assembly.