Endress+Hauser Liquiline CA80SI, Руководство по эксплуатации

Страница: 157 / 172

Liquiline System CA80SI Technical data
Hauser 157
15 Technical data
15.1 Input
Measured variables SIO
2
[mg/l, µg/l, ppm, ppb]
Measuring range CA80SI-**AH*: 0 to 500 µg/l (ppb)
CA80SI-**AJ*: 50 to 5 000 µg/l (ppb)
Types of input • 1, 2, 4 or 6 measuring channels (analyzer main parameter)
• 1 to 4 digital sensor inputs for sensors with Memosens protocol (optional)
• Analog current inputs (optional)
• Binary inputs (optional)
Input signal Depending on version
2 x 0/4 to 20 mA (optional), passive, potentially isolated
Current input, passive Span
> 0 to 20 mA
Signal characteristic
Linear
Internal resistance
Non-linear
Test voltage
500 V
Cable specification
(for optional sensors with
Memosens technology)
Cable type
Memosens data cable CYK10 or sensor fixed cable, each with cable end sleeves or M12
round-pin connector (optional)
Cable length
Max. 100 m (330 ft)
15.2 Output
Output signal Depending on version:
• 2 x 0/4 to 20 mA, active, potentially isolated (standard version)
• 4 x 0/4 to 20 mA, active, potentially isolated (version with 2 additional analog outputs)
• 6 x 0/4 to 20 mA, active, potentially isolated (version with 4 additional analog outputs)
• Binary outputs