Endress+Hauser Liquiline CA80SI, Руководство по эксплуатации

Страница: 132 / 172

Diagnostics and troubleshooting Liquiline System CA80SI
132 Hauser
11.10 System information
DIAG/System information
Function Options Info
Device tag Read only Individual device tag → General
settings
Order code Read only You can order identical hardware
with this code.
This code changes on account of
changes to the hardware and you
can enter the new code you received
from the manufacturer here
1)
.

To establish the version of your device, enter the order code into the search screen at the following
address:
www.endress.com/order-ident
Orig. order code ext. Read only Complete order code for the original
device, resulting from the product
structure.
Current order code ext. Read only Current code, taking into account
changes to the hardware. You must
enter this code yourself.
Serial number Read only The serial number allows you to
access device data and
documentation on the Internet:
www.endress.com/device-viewer
Software version Read only Current version
Measuring parameter Read only Set measuring parameter
MPL version Read only Current version
Actuator control module Read only
• Firmware version
• Hardware version
Photometer Read only
• Firmware version
• Hardware version
Modbus
Only with the Modbus option
Read only
• Enable
• Bus address
• Termination
• Modbus TCP Port 502 Modbus
‐
specific information
PROFIBUS
Only with the PROFIBUS option
Read only
• Termination
• Bus address
• Ident number
• Baudrate
• DPV0 state
• DPV0 fault
• DPV0 master addr
• DPV0 WDT [ms] Module status and other PROFIBUS-
specific information
Ethernet
Only with the Ethernet, EtherNet/IP,
Modbus TCP, Modbus RS485 or PROFIBUS
DP or PROFINET option
Read only
• Enable
• Webserver
• Link settings
• DHCP
• IP-Address
• Netmask
• Gateway
• Service switch
• MAC-Address
• EtherNetIP Port 44818
• Modbus TCP Port 502
• Webserver TCP port 80 Ethernet
‐
specific information
Display depends on the fieldbus
protocol used.