Électronique du Mazet ECHODIA ELIOS, Руководство пользователя

Страница: 14 / 151

User guide
ELI O S
ECH001XN111-A4 – 07/2022
13
Chapter 2
General information about using
ELI O S
2.1 Initial Start-up of the device
2.1.1 Switching on / starting
The device can be turned on without any other part connected (OAE probe, EchoDif).
Turn on the power using the switch on top of the device (if it does not start, make sure the device's battery is charged)
2.1.2 Touch screen calibration
For the first start-up, it is necessary to calibrate the touch
screen. The following window appears:
The screen has to be calibrated at 5 different points.
Simply hold the stylus down on the cross at the center
of each of the circles that appear successively.
2.1.3 Password
After the screen calibration, the password definition windows appear. If you choose to set up a password, it will be
asked to you each time you start the device. To do this, click on “Lock the device with a password” and set your password
by clicking on “Change Password”. The password must contain between 1 and 15 characters, and will be asked twice in
order to ensure the proper seized of it.
You can access the password configuration window later from the “Measure” then “System” menu. This window
allows you to change the password, but also to activate or deactivate the locking.
If you forget your password, please contact Electronique du Mazet or your reseller to receive an unlocking code.
Calibration is important for comfortable use. It is highly advisable to calibrate the device while holding it on
a table, and using the stylus.