manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 341 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 341

Chapter 9

  |  General Security Measures

IPv6 Source Guard

–  341  –

◆

Filtering rules are implemented as follows:

■

If ND snooping and DHCPv6 snooping are disabled, IPv6 source guard will 
check the VLAN ID, source IPv6 address, and port number. If a matching 
entry is found in the binding table and the entry type is static IPv6 source 
guard binding, the packet will be forwarded.

■

If ND snooping or DHCPv6 snooping is enabled, IPv6 source guard will 
check the VLAN ID, source IP address, and port number. If a matching entry 
is found in the binding table and the entry type is static IPv6 source guard 
binding, dynamic ND snooping binding, or dynamic DHCPv6 snooping 
binding, the packet will be forwarded.

■

If IPv6 source guard is enabled on an interface for which IPv6 source 
bindings (dynamically learned via ND snooping or DHCPv6 snooping, or 
manually configured) are not yet configured, the switch will drop all IPv6 
traffic on that port, except for ND packets and DHCPv6 packets allowed by 
DHCPv6 snooping.

■

Only IPv6 global unicast addresses are accepted for static bindings.

Example

This example enables IP source guard on port 5.

Console(config)#interface ethernet 1/5

Console(config-if)#ipv6 source-guard sip

Console(config-if)#

Related Commands 

ipv6 source-guard binding (338)
ipv6 dhcp snooping (321)
ipv6 dhcp snooping vlan (326)

ipv6 source-guard

max-binding

This command sets the maximum number of entries that can be bound to an 
interface. Use the 

no

 form to restore the default setting.

Syntax 

ipv6 source-guard max-binding

 

number

no

 

ipv6 source-guard

 

max-binding

number

 - The maximum number of IPv6 addresses that can be mapped to 

an interface in the binding table. (Range: 1-5)

Default Setting 

5

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов