manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 196 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 196

Chapter 5

  |  SNMP Commands

Notification Log Commands

–  196  –

Example

This example enables the notification log A1.

Console(config)#nlm A1 

Console(config)#

snmp-server

notify-filter

This command creates an SNMP notification log. Use the 

no

 form to remove this 

log.

Syntax 

[

no

] 

snmp-server notify-filter

 

profile-name

 

remote

 

ip-address

profile-name

 - Notification log profile name. (Range: 1-32 characters) 

ip-address

 - IPv4 or IPv6 address of a remote device. The specified target 

host must already have been configured using the 

snmp-server host

 

command.

Note:

 The notification log is stored locally. It is not sent to a remote device. This 

remote host parameter is only required to complete mandatory fields in the SNMP 
Notification MIB.

Default Setting 

None 

Command Mode 

Global Configuration

Command Usage 

◆

Systems that support SNMP often need a mechanism for recording Notification 
information as a hedge against lost notifications, whether there are Traps or 
Informs that may exceed retransmission limits. The Notification Log MIB (NLM, 
RFC 3014) provides an infrastructure in which information from other MIBs may 
be logged.

◆

Given the service provided by the NLM, individual MIBs can now bear less 
responsibility to record transient information associated with an event against 
the possibility that the Notification message is lost, and applications can poll 
the log to verify that they have not missed any important Notifications.

◆

If notification logging is not configured and enabled, when the switch reboots, 
some SNMP traps (such as warm start) cannot be logged.

◆

To avoid this problem, notification logging should be configured and enabled 
using the 

snmp-server notify-filter

 command and 

nlm

 command, and these 

commands stored in the startup configuration file. Then when the switch 
reboots, SNMP traps (such as warm start) can now be logged.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов