Edge-Core ECS4120-28F Скачать руководство пользователя страница 189

Страница: 189 / 938

Chapter 5

| SNMP Commands

SNMPv3 Commands

– 189 –

Command Mode

Global Configuration

Command Usage

◆

A group sets the access policy for the assigned users.

◆

When authentication is selected, the MD5 or SHA algorithm is used as specified
in the

snmp-server user

command.

◆

When privacy is selected, the DES 56-bit algorithm is used for data encryption.

◆

For additional information on the notification messages supported by this
switch, see the table for “Supported Notification Messages” in the

Web

Management Guide

. Also, note that the authentication, link-up and link-down

messages are legacy traps and must therefore be enabled in conjunction with
the

snmp-server enable traps

command.

Example

Console(config)#snmp-server group r&d v3 auth write daily

Console(config)#

snmp-server user

This command adds a user to an SNMP group, restricting the user to a specific
SNMP Read, Write, or Notify View. Use the

form to remove a user from an SNMP

group.

Syntax

snmp-server user

username

groupname

[

remote

ip-address

]

{

v2c

[

encrypted

] [

auth

{

md5

sha

}

auth-password

[

priv

{

3des

aes128

aes192

aes256

des56

}

priv-password

]]

snmp-server user

username

groupname

remote

ip-address

{

[

encrypted

] [

auth

{

md5

sha

}

auth-password

[

priv

{

3des

aes128

aes192

aes256

des56

}

priv-password

]]

no snmp-server user

username

{

v2c

remote

ip-address

}

username

- Name of user connecting to the SNMP agent.

(Range: 1-32 characters)

groupname

- Name of an SNMP group to which the user is assigned.

(Range: 1-32 characters)

remote

- Specifies an SNMP engine on a remote device.

ip-address

- IPv4 or IPv6 address of the remote device.

v2c

- Use SNMP version 1, 2c or 3.

encrypted

- Accepts the password as encrypted input.

auth

- Uses SNMPv3 with authentication.

2. Maps to the defaultview.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4120-28F

Отзывы:

Edge-Core ECS4120-28F, Справочное руководство, Страница: 189 / 938

Результаты поиска

Содержание ECS4120-28F

Отзывы: