Edge-Core ECS4120-28F Скачать руководство пользователя страница 728 | Manualshive

Страница: 728 / 938

Edge-Core ECS4120-28F Скачать руководство пользователя страница 728

Chapter 24

| Multicast Filtering Commands

MVR for IPv6

– 728 –

Command Mode

Global Configuration

Command Usage

◆

This command sets the number of times report messages are sent upstream
when changes are learned about downstream groups, and the number of times
group-specific queries are sent to downstream receiver ports.

◆

This command only takes effect when MVR6 proxy switching is enabled.

Example

Console(config)#mvr6 robustness-value 5

Console(config)#

Related Commands

mvr6 proxy-switching (726)

mvr6 source-port-

mode dynamic

This command configures the switch to only forward multicast streams which the
source port has dynamically joined. Use the

no

form to restore the default setting.

Syntax

[

no

]

mvr6 source-port-mode dynamic

Default Setting

Forwards all multicast streams which have been specified in a profile and bound to
a domain.

Command Mode

Global Configuration

Command Usage

◆

By default, the switch forwards any multicast streams within the address range
set by a profile, and bound to a domain. The multicast streams are sent to all
source ports on the switch and to all receiver ports that have elected to receive
data on that multicast address.

◆

When the

mvr6

source-port-mode dynamic

command is used, the switch

only forwards multicast streams which the source port has dynamically joined.
In other words, both the receiver port and source port must subscribe to a
multicast group before a multicast stream is forwarded to any attached client.
Note that the requested streams are still restricted to the address range which
has been specified in a profile and bound to a domain.

«
...
726
727
728
729
730
...
»

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов