manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 428 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 428

Chapter 12

  |  Link Aggregation Commands

Manual Configuration Commands

–  428  –

router trunk links where traffic through the switch is received from and 
destined for many different hosts. 

■

src-dst-mac

: All traffic with the same source and destination MAC address 

is output on the same link in a trunk. This mode works best for switch-to-
switch trunk links where traffic through the switch is received from and 
destined for many different hosts. 

■

src-ip

: All traffic with the same source IP address is output on the same link 

in a trunk. This mode works best for switch-to-router or switch-to-server 
trunk links where traffic through the switch is received from many different 
hosts.

■

src-mac

: All traffic with the same source MAC address is output on the 

same link in a trunk. This mode works best for switch-to-switch trunk links 
where traffic through the switch is received from many different hosts.

Example 

Console(config)#port-channel load-balance dst-ip

Console(config)#

channel-group

This command adds a port to a trunk. Use the 

no

 form to remove a port from a 

trunk.

Syntax 

channel-group

 

channel-id

no channel-group

channel-id

 - Trunk index (Range: 1-26)

Default Setting 

The current port will be added to this trunk.

Command Mode 

Interface Configuration (Ethernet)

Command Usage 

◆

When configuring static trunks, the switches must comply with the Cisco 
EtherChannel standard.

◆

Use

 no channel-group 

to

 

remove a port group from a trunk.

◆

Use 

no interface port-channel

 to remove a trunk from the switch.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов