Edge-Core ECS4120-28F, Справочное руководство, Страница: 439 / 938

– 439 –
13
Power over Ethernet Commands
The commands in this group control the power that can be delivered to attached
PoE devices through RJ-45 ports 1-24 on the ECS4120-28P.
The switch’s power management enables total switch power and individual port
power to be controlled within a configured power budget. Port power can be
automatically turned on and off for connected devices, and a per-port power
priority can be set so that the switch never exceeds its allocated power budget.
When a device is connected to a switch port, its power requirements are detected
by the switch before power is supplied. If the power required by a device exceeds
the power budget of the port or the whole switch, power is not supplied.
power mainpower
maximum allocation
This command defines a power budget for the switch (i.e., the power available to all
switch ports). Use the
no form to restore the default setting.
Syntax
power mainpower maximum allocation milliwatts
milliwatts - The power budget for the switch. (Range: 37000-370000
milliwatts)
Default Setting
370000 milliwatts
Table 82: PoE Commands
Command Function Mode
power mainpower
maximum allocation Sets the maximum power available to all switch ports GC
power inline Turns power on and off for specific ports IC
power inline maximum
allocation Sets the maximum power available to specific switch ports IC
power inline priority Sets the priority for power supplied to specific ports IC
power inline time-range Binds a time-range to a port during which PoE is supplied IC
show power inline status Displays the current status of power management on specific
ports or all ports PE
show power inline time-
range Shows the time-range and current status for specific ports or
for all ports PE
show power mainpower Displays current status of power management for the switch PE