manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 893 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 893

Chapter 30

  |  IP Interface Commands

ND Snooping

–  893  –

ipv6 nd snooping

max-binding

This command sets the maximum number of address entries in the dynamic user 
binding table which can be bound to a port. Use the 

no

 form to restore the default 

setting.

Syntax 

ipv6 nd snooping max-binding

 

max-bindings

no

 

ipv6 nd snooping max-binding

max-bindings

 – The maximum number of address entries in the dynamic 

user binding table which can be bound to a port. (Range: 1-5)

Default Setting 

5

Command Mode

Interface Configuration (Ethernet, Port Channel)

Example

Console(config)#ipv6 nd snooping max-binding 200

Console(config)#

ipv6 nd snooping trust

This command configures a port as a trusted interface from which prefix 
information in RA messages can be added to the prefix table, or NS messages can 
be forwarded without validation. Use the 

no

 form to restore the default setting.

Syntax 

[

no

] 

ipv6 nd snooping trust

Default Setting 

Not trusted

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

◆

In general, interfaces facing toward to the network core, or toward routers 
supporting the Network Discovery protocol, are configured as trusted 
interfaces.

◆

RA messages received from a trusted interface are added to the prefix table and 
forwarded toward their destination.

◆

NS messages received from a trusted interface are forwarded toward their 
destination. Nothing is added to the dynamic user binding table.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов