manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 160 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 160

Chapter 4

  |  System Management Commands

Time

–  160  –

ntp client

This command enables NTP client requests for time synchronization from NTP time 
servers specified with the 

ntp servers

 command. Use the 

no

 form to disable NTP 

client requests.

Syntax 

[

no

] 

ntp client

Default Setting 

Disabled

Command Mode 

Global Configuration

Command Usage 

◆

The SNTP and NTP clients cannot be enabled at the same time. First disable the 
SNTP client before using this command.

◆

The time acquired from time servers is used to record accurate dates and times 
for log events. Without NTP, the switch only records the time starting from the 
factory default set at the last bootup (i.e., 00:00:00, Jan. 1, 2015).

◆

This command enables client time requests to time servers specified via the 

ntp servers

 command. It issues time synchronization requests based on the 

interval set via the 

ntp poll

 command.

Example 

Console(config)#ntp client

Console(config)#

Related Commands

sntp client (155)
ntp server (160)

ntp server

This command sets the IP addresses of the servers to which NTP time requests are 
issued. Use the 

no

 form of the command to clear a specific time server or all servers 

from the current list.

Syntax 

ntp server

 

ip-address 

[

key

 

key-number

]

no ntp server

 [

ip-address

]

ip-address

 - IP address of an NTP time server. 

key-number

 - The number of an authentication key to use in 

communications with the server. (Range: 1-65535)

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов