manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 315 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 315

Chapter 9

  |  General Security Measures

DHCPv4 Snooping

–  315  –

will be performed on any untrusted ports within the VLAN as specified by the 

ip 

dhcp snooping trust

 command.

◆

When the DHCP snooping is globally disabled, DHCP snooping can still be 
configured for specific VLANs, but the changes will not take effect until DHCP 
snooping is globally re-enabled.

◆

When DHCP snooping is globally enabled, and then disabled on a VLAN, all 
dynamic bindings learned for this VLAN are removed from the binding table.

Example

This example enables DHCP snooping for VLAN 1.

Console(config)#ip dhcp snooping vlan 1

Console(config)#

Related Commands 

ip dhcp snooping (306)
ip dhcp snooping trust (317)

ip dhcp snooping

information option

circuit-id

This command specifies DHCP Option 82 circuit-id suboption information. Use the 

no

 form to use the default settings.

Syntax 

ip dhcp snooping information option circuit-id 

{string

string | 

{

tr101 

{

node-identifier 

{

ip

 | 

sysname

} | 

no-vlan-field

}

no dhcp snooping information option circuit-id 

[

tr101 no-vlan-field

]

string

 - An arbitrary string inserted into the circuit identifier field. 

(Range: 1-32 characters)

tr101

 

node-identifier 

- The remote ID generated by the switch is based on 

TR-101 syntax (R-124, Access_Node_ID).

ip 

- Specifies the switch’s IP address as the node identifier.

sysname 

- Specifies the system name as the node identifier.

tr101

 

no-vlan-field 

- Do not add “:VLAN” in TR101 field for untagged 

packets.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов