manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 431 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 431

Chapter 12

  |  Link Aggregation Commands

Dynamic Configuration Commands

–  431  –

Default Setting 

Actor: 1, Partner: 0

Command Mode 

Interface Configuration (Ethernet)

Command Usage 

◆

Ports are only allowed to join the same LAG if (1) the LACP system priority 
matches, (2) the LACP port admin key matches, and (3) the LACP port channel 
key matches (if configured).

◆

If the port channel admin key (

lacp admin key

 - Port Channel) is not set when a 

channel group is formed (i.e., it has the null value of 0), this key is set to the 
same value as the port admin key (

lacp admin key

 - Ethernet Interface) used 

by the interfaces that joined the group.

◆

Once the remote side of a link has been established, LACP operational settings 
are already in use on that side. Configuring LACP settings for the partner only 
applies to its administrative state, not its operational state.

Note:

 Configuring the partner admin-key does not affect remote or local switch 

operation. The local switch just records the partner admin-key for user reference.

◆

By default, the actor’s operational key is determined by port's link speed 
(1000f - 4, 100f - 3, 10f - 2), and copied to the admin key.

Example

Console(config)#interface ethernet 1/5

Console(config-if)#lacp actor admin-key 120

Console(config-if)#

lacp port-priority

This command configures LACP port priority. Use the 

no

 form to restore the default 

setting.

Syntax 

lacp

 {

actor

 | 

partner

} 

port-priority

 

priority

no lacp

 {

actor

 | 

partner

} 

port-priority

actor

 - The local side an aggregate link.

partner

 - The remote side of an aggregate link.

priority

 - LACP port priority is used to select a backup link. (Range: 0-65535)

Default Setting 

32768

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов