manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 649 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 649

Chapter 24

  |  Multicast Filtering Commands

IGMP Snooping

–  649  –

ip igmp snooping

version-exclusive

This command discards any received IGMP messages (except for multicast protocol 
packets) which use a version different to that currently configured by the 

ip igmp 

snooping version

 command. Use the 

no

 form to disable this feature.

Syntax 

ip igmp snooping 

[

vlan

 

vlan-id

]

 version-exclusive

no ip igmp snooping version-exclusive

vlan-id

 - VLAN ID (Range: 1-4094) 

Default Setting 

Global: Disabled
VLAN: Disabled 

Command Mode 

Global Configuration

Command Usage 

◆

If version exclusive is disabled on a VLAN, then this setting is based on the 
global setting. If it is enabled on a VLAN, then this setting takes precedence 
over the global setting.

◆

When this function is disabled, the currently selected version is backward 
compatible (see the 

ip igmp snooping version

 command.

Example 

Console(config)#ip igmp snooping version-exclusive

Console(config)#

ip igmp snooping vlan

general-query-

suppression

This command suppresses general queries except for ports attached to 
downstream multicast hosts. Use the 

no

 form to flood general queries to all ports 

except for the multicast router port.

Syntax 

[

no

] 

ip igmp snooping vlan

 

vlan-id

 

general-query-suppression

vlan-id

 - VLAN ID (Range: 1-4094)

Default Setting 

Disabled 

Command Mode 

Global Configuration

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов